PROJECTS

I've done

Currently posting things from the archives. ~90% done.

I noticed no one had taken high res pics of the board inside of the Razer Chroma ARGB controller, so I bought one to take a look at. Here are pics and datasheets of the chips found within. Click images for full size!

TopAnnotated

On the top side we have the following:

I have been wanting to upgrade the wimpy fluorescent lights in my house for a long time, but 2'x4' LED panels are expensive. I found a really good deal on some Cree panels so I bought enough to replace all the ones in my house. I wanted them to be smart compatible so I could use alexa to dim them and turn them off/on. Unfortunately These are commercial lights so they use 0-10v signals for dimming. I could not find any smart home compatible 0-10v dimmers so I set about building my own.

Another poppy craft. The Poppy symbol is a P inside of a triangle. I made cutouts of these with LEDs on the back that were mounted about an inch off the wall to allow a back glow to them.

For my laser cutter, I did not want the fume extraction system to be open to the outside when the laser was not in use. I added some blast gates (valves) to the piping but did not like having to manually open them because they are behind the machine and hard to reach.

I came up with a method of m...

At work I built an automatic wire cutter for cutting out many lengths of wire on some panels.